Small mechanical thermostat NO

Small NO contact mechanical thermostat

The KTS 111 mechanical thermostats are two-state regulators for use up to 5,000 meters altitude, thanks to its low dispersion internal mechanism. Use Push-In terminals for tool-free wiring. Push-In terminals provide constant pressure on the cables to prevent them from coming loose (e.g. during transport).

KTS 111: Thermostat (NO); contact for regulating filter fans and heat exchangers or for the switching signal, activates the contact when the temperature limit has been exceeded. The contact returns to rest when the temperature drops.

Details:

Type: mechanical thermostat
Contact: NO (normally open)
Sensor type: thermostatic bimetallic
Use cycles: 100000
Maximum working voltage: 250Vac
Maximum current : 16A for 10 seconds, typical 10A 250Vac / 30W 24-72Vdc
Cable section: 2.5mm rigid (14AWG) / 1.5mm flexible (16AWG)
Fixing: clip for DIN 35mm EN 60715
/>Casing: plastic
Dimensions: 60x33x41mm
Weight: 40gr
Protection: IP20