Professional 6-12V lead battery charger SX3 - Alcapower

Elettrox offers a wide range of solutions to meet your needs in the world of electronics and repairs.

Automatic battery charger and maintainer for lead acid and LiFePO4 6V and 12V batteries

AlcaPower SX-3 is an intelligent, multi-phase battery charger equipped with a microcontroller that allows you to manage the charge and maintenance of lead acid batteries (WET, AGM, VRLA and GEL) with a nominal voltage of 6V and 12V. Furthermore, thanks to the dedicated mode, it is able to charge 12.8V LiFePO4 batteries up to a maximum of 15Ah.

6V Mode

This mode allows you to charge lead acid batteries with a nominal voltage of 6V. Once the battery is connected to the charger, the latter automatically detects its voltage. If the voltage is between 2V~7V, the battery charger starts the 6V mode and charges the battery with a maximum current of 2.5A. The charge status indicator LEDs (25% LED, 50% LED, etc.) light up in sequence until the battery has reached the maximum possible charge. At this point the battery charger lights up the 100% LED and starts the battery maintenance phase.

12V Mode

This mode allows the charging of lead batteries with a nominal voltage of 12V. Once the battery is connected to the charger, the latter automatically detects its voltage. If the voltage is between 7V~14V, the battery charger starts the 12V mode and charges the battery with a maximum current of 2.5A. The charge status indicator LEDs (25% LED, 50% LED, etc.) light up in sequence until the battery has reached the maximum possible charge. At this point the charger lights up the 100% LED and starts the battery maintenance phase.

LITHIUM Mode

By holding down the MODE button for 3 seconds you can access the LITHIUM charging mode, specifically designed for charging LiFePO4 batteries with a nominal voltage of 12.8V and capacities between 2Ah and 15Ah. If the battery voltage is between 11.6V~13.8V, the charger starts charging with a maximum current of 2.5A. The charging status indicator LEDs (LED25%, LED50% etc.) light up in sequence until the battery reaches a voltage of 14.5V, after which the 100% LED lights up to indicate that the battery is charged. Use the SX-3 only to charge LiFePO4 batteries equipped with a BMS (Battery Management System) protection circuit.

Details:

Input: 200-240V AC 50/60Hz
Battery compatibility: 6V and 12V
Compatible battery types: WET, MF, VRLA, AGM, GEL, LiFePO4
Charging type: constant current and voltage
Maximum charging current at 6V/12V: 2.5A
Maximum charging current at 12.8V: 2.5A
End of charge voltage in standard mode: 7.3V (6V) and 14.5V (12V)
6V battery detection voltage: 2.0V to 7V
12V battery detection voltage: 7V to 14V
Battery detection voltage 12.8V: from 11.6V to 13.8V
Recommended capacities lead 6V: from 4 to 50Ah
Recommended capacities lead 12V: from 4 to 50Ah
Recommended capacities lithium 12.8V: from 2Ah to 15Ah
Working temperature: from 0 to 40 °C
Protection degree: IP65
Weight: approximately 190g

Rely on Elettrox to choose reliable and high quality products