MotionCam Outdoor PhOD Ajax motion detector white

    MotionCam Outdoor PhOD Ajax motion detector white

    Tax included Shipped in 2/3gg

    MotionCam Outdoor PhOD Ajax motion detector white



    Quick shipment in all Italy territory


    Safe payments with cards

    MotionCam Outdoor PhOD Ajax motion detector white

    MotionCam Outdoor is equipped with two independent PIR sensors, whose signals are analyzed by the two-phase LISA algorithm. When both sensors detect movement, LISA performs correlative analysis of the signal spectrum, allowing you to immediately distinguish real threats from interference.

    Correlative analysis

    Every time MotionCam Outdoor detects movement, LISA analyzes and compares the shapes of the signals coming from the two sensors in real time. If they are similar, the alarm is activated.

    Spectral analysis

    When both sensors detect motion but correlative analysis does not identify sufficient similarities, LISA compares the frequency components of the signals from both sensors.

    Surveillance of outdoor spaces and confirmation of alarms

    MotionCam Outdoor is equipped with a camera to quickly assess the situation inside the protected structure. The detector takes an automatic series of photos as soon as it identifies an intrusion into the protected area. The series of photos is displayed in an animation that allows you to see the dynamics of the evolving situation. MotionCam Outdoor PhOD can take a series of photos upon a user's request from the Ajax mobile application, regardless of the security mode.

    So as not to miss anything

    Combining the excellence of the optical system, the fastest processor and an advanced software algorithm, MotionCam Outdoor takes informative photos in all weather conditions, day and night.

    Camera designed for surveillance

    An outdoor camera is often found taking photos in difficult lighting conditions. Direct sunlight, reflective surfaces, or street lighting can hinder the camera, robbing images of critical details. This is not acceptable for a safety device. We have accepted the challenge of obtaining clear and sharp images capable of confirming intrusions in a few seconds and allowing security institutions to react in time.

    Quality is in the details

    We rejected a plastic optical system to create a waterproof glass and metal lens. The wide-angle lens covers the entire protected area, providing a complete image of what's happening. In bright light, an infrared filter is automatically applied to ensure distortion-free color reproduction and two powerful IR LEDs allow you to see intruders even in total darkness.


    To capture a photo, MotionCam Outdoor takes two consecutive short exposure photos. The processor merges shots instantly, equalizing the balance between light and dark areas, then compresses the image for faster transmission. Thanks to HDR, the detector uses less IR backlight at night to save battery.

    Advantages of photo verification

    If in doubt, system users can check what is happening in the plant. There is no need to wait for an alarm. Just open the application and you will see the situation in a few moments. Outdoor motion detectors operate in a complex environment full of natural sources of false alarms. MotionCam Outdoor allows system users and central station operators to see within seconds whether the alarm is real, so they can respond accordingly. Both system users and the security patrol must be able to clearly understand what is happening in the plant when an alarm is activated. The detector will show how many criminals are present on the premises and whether they are armed. This will help the patrol to prepare properly and users will be able to avoid danger. A series of animated photos in the application allows you to transmit the characteristics of the thieves to the police without wasting time. Thanks to the infrared backlight, the detector detects attackers even in complete darkness. This increases the chances of catching criminals on the spot.

    Privacy first and foremost

    MotionCam Outdoor (PhOD) Jeweler is designed to ensure security without compromising privacy. Photos are protected from prying eyes at the detector, system and application level.

    Exclusive wireless technologies

    The detector uses two protocols simultaneously: Jeweler for alarm notifications and Wings for photo transmission. Jeweler guarantees instant delivery of alarms while Wings sends the first photo from the system in 9 seconds. Even with interrupted communication or weak signal. Thanks to the communication range with the Ajax hub of up to 1700 meters, the detector can beinstalled where it will be most useful.

    Effective safety in all weather conditions

    MotionCam Outdoor is heat resistant up to +60°С and cold resistant up to -25°С. And to protect the sensors of the anti-masking system from rain and snow, we provide a special Hood.

    Intuitive installation and connection

    The detector connects to your Ajax security system in just a few clicks. Open the Ajax app, scan the QR code and add the detector to the room. There is no need to disassemble the detector housing. The SmartBracket mounting panel allows you to mount the detector securely either on a flat surface or in a corner.


    Model: MotionCam Outdoor PhOD
    Color: white
    Connection type: wireless, proprietary wireless communication technology for the transmission of alarms and events
    Working frequencies: 866.0 – 866.5 MHz, 868.0 – 868.6 MHz, 868.7 – 869.2 MHz, 905.0 – 926.5 MHz, 915.85 – 926.5 MHz, 921.0 – 922.0 MHz
    Maximum effective radiated power (ERP): up to 20mW (Automatic power control to reduce power consumption and noise interference)
    Radio signal modulation: GFSK
    Maximum distance: 1.7Km (Between the hub and connected devices in an open field. The maximum range depends on the connected devices and may vary)
    Ping interval: 12 to 300 sec
    Encryption: All saved and transmitted data is protected by dynamic key block encryption
    Frequency hopping: To prevent radio interference and radio signal interception
    Sensor type: 2 x PIR sensor
    Detection distance: 3-15m
    Recommended installation height: 0.8-1.3m
    Motion detection angle: 90° horizontal
    Motion detection speed: 0.3-2m/s
    Sensitivity: adjustable, on 3 levels
    Animal immunity: any weight, maximum height 80cm
    False alarm prevention: LISA, SmartDetect
    Temperature compensation: Effective motion detection with temperatures from −25°C to +60°C
    Photo by alarm: yes
    Photo on demand: the user takes a photo at any time or when the detector is armed (depends on settings)
    Photo per scenario: The detector camera takes photos automatically when Ajax fire detectors are engaged
    Photo resolution: 640 × 352px, 320 × 176px (default)
    Camera detection angles: horizontal 105°, vertical 50°
    IR illumination: yes
    Image series: 1 to 5 images with a resolution of 320 × 176px, 1 to 3 images with a resolution of 640 × 352px
    Alarm delivery time: within 9 s - with a resolution of 320 × 176px, within 20 s - with a resolution of 640 × 352px
    TV distortion (EBU standard): per barrel 17%
    Tamper-proof systems: Anti-counterfeiting protection, Inhibition detection, Resistant to tampering
    Connection loss communication: within 36 seconds
    Power supply: 4 x CR123A lithium 3V
    Battery life : up to 3 years without photo, up to 3 years with photo
    Dimensions: 206 × 108 × 93 mm
    Weight: 470 gr
    Waterproof: IP55
    Max humidity: 95%

    Product Details

    10 Items

    Data sheet