MotionCam Outdoor Ajax motion detector white - Ajax

Elettrox offers a wide range of solutions to meet your needs in the world of electronics and repairs.

MotionCam Outdoor Ajax motion detector white

MotionCam Outdoor recognizes intrusions from the first steps on the territory and confirms them with an animated series of photos. Photo verification allows immediate assessment of the situation, avoiding worries for users and unnecessary interventions by security institutions.

Combining the excellence of the optical system, the fastest processor and the advanced software algorithm, MotionCam Outdoor takes informative photos in all weather conditions, day and night.

Camera designed for surveillance

An outdoor camera is often found taking photos in difficult lighting conditions. Direct sunlight, reflective surfaces, or street lighting can hinder the camera, robbing images of critical details. This is not acceptable for a safety device. We have accepted the challenge of obtaining clear and sharp images capable of confirming intrusions in a few seconds and allowing security institutions to react in time.

Quality is in the details

A plastic optical system was rejected to create a waterproof glass and metal lens. The wide-angle lens covers the entire protected area, providing a complete image of what's happening. In bright light, an infrared filter is automatically applied to ensure distortion-free color reproduction and two powerful IR LEDs allow you to see intruders even in total darkness.

HDR

To capture a photo, MotionCam Outdoor takes two consecutive short exposure photos. The processor merges shots instantly, equalizing the balance between light and dark areas, then compresses the image for faster transmission. Thanks to HDR, the detector uses less IR backlight at night to save battery.

Intelligent false alarm filter

MotionCam Outdoor is equipped with two independent PIR sensors, whose signals are analyzed by the two-phase LISA algorithm. When both sensors detect movement, LISA performs correlative analysis of the signal spectrum, allowing it to immediately distinguish real threats from interference.

Correlative analysis: Every time MotionCam Outdoor detects movement, LISA analyzes and compares the shapes of the signals coming from the two sensors in real time. If they are similar, the alarm is activated.

Spectral Analysis: When both sensors detect motion, but correlative analysis does not identify sufficient similarities, LISA compares the frequency components of the signals from both sensors.

Multi-level anti-tamper protection

MotionCam Outdoor cannot be deactivated without being noticed, even when the system is disarmed. The detector is equipped with anti-masking sensors that react to obstacles, coverage and lens painting. It will take the hub less than a minute1 to detect the loss of communication with the detector and communicate the problem to a monitoring station and users. The fact that MotionCam Outdoor has been disassembled will be noticed immediately.

Effective safety in all weather conditions

MotionCam Outdoor is heat resistant up to +60°С and cold resistant up to –25°С. And to protect the sensors of the anti-masking system from rain and snow, we provide a special Hood.

Reliability of communication without compromise

MotionCam Outdoor uses two secure radio protocols simultaneously: Jeweler and Wings. Radio protocols work independently of each other and each focuses on its own function. Jeweler transmits alerts in 0.15 seconds and, thanks to Wings, the first image of the site will arrive in the app in less than 9 seconds2.

The range of the radio signal is sufficient to install the detector where it will be most effective. The 3-year battery life minimizes maintenance required.

Less manual work. More settings in the app

The process of connecting and configuring MotionCam Outdoor saves the installation engineer's time in the best possible way. To add a detector to your system, simply scan the QR code with the Ajax app and assign it a name and room. You can configure the device in real time via the app, test detection zones and communication. If necessary, the detector can be deactivated or the system parameters can be reconfigured remotely, without having to intervene on site.

Details:

Model: MotionCam Outdoor
Color: white
Detector type: wireless
Recommended installation height: 0.8 - 1.3m
Installation: outdoor / indoor
Sensor element: 2 PIR sensors
Motion detection distance: 3 to 15m
Pet immunity: pets up to a height of 80cm
Sensitivity: adjustable, 3 levels
Motion detector viewing angle: horizontal 105°, vertical 80°
Camera viewing angle: horizontal 105°, vertical 50°
TV distortion (EBU standard): barrel, -17 %
Photo in case of alarm: photo resolution 320x176 px (standard setting), 640x352px. Max 5 shots in sequence
Infrared lighting for night shots: yes
Power supply: 4 CR123A lithium 3V batteries
Battery life: up to 3 years (up to 2.5 years if l “Input delay” setting)
Working frequencies: 866.0 – 866.5 MHz, 868.0 – 868.6 MHz, 868.7 – 869.2 MHz, 905.0 – 926.5 MHz, 915.85 – 926.5 MHz, 921.0 – 922.0 MHz
Power maximum effective radiated power (ERP): up to 20mW (Automatic power control to reduce power consumption and noise interference)
Radio signal modulation: GFSK
Maximum distance: 1.7Km (Between hub and connected devices in an open field. The maximum range depends on the connected devices and may vary)
Ping interval: 12 to 300 sec
Encryption: all saved and transmitted data is protected by block encryption with dynamic key
Frequency hopping: to prevent radio interference and radio signal interception
Alarm response time: 0.15 seconds
Wings technology: transmission of a series of photos, reception time of photos with default setting: up to 9 seconds
Temperature sensor: yes
Working temperature: –25°С / +60°С
Waterproof class: IP55
Anti-proof systems -tamper: Anti-counterfeiting protection, Inhibition detection, Tamper resistant
Dimension: 206 × 108 × 93 mm
Weight: 470 g

Rely on Elettrox to choose reliable and high quality products