Fast resealable cyanoacrylate glue 5gr Wurth Klebfix - EX

Elettrox offers a wide range of solutions to meet your needs in the world of electronics and repairs.

Fast resealable cyanoacrylate glue 5gr Wurth Klebfix

For bonding metal, plastic and rubber parts with and to each other in seconds.

Smart special locking

- Precise dispensing
- The tips do not clog

Paste in seconds

- Further processing is immediately possible
- Fast repairs
- Simple designs without additional fastening materials
- High level of resistance to aging and climatic conditions
- Solvent and silicone free

Application area

Super-fast adhesive for bonding metal, plastic and rubber parts to each other.

Indication

It is recommended that you wear gloves and safety glasses. If surfaces are too dry or acidic, hardening will be delayed or prevented, while high levels of humidity and alkaline surfaces will accelerate it.

Application surfaces must be clean, dry and free of grease. For pre-treatment, see the technical data sheet. Apply a thin uniform layer of adhesive to only one of the surfaces to be bonded. Apply enough pressure to make an immediate connection to ensure complete contact.

Due to the vapor pressure of the liquid adhesive, slow curing of excess product around the adhesion area may cause white deposits (blooming effect). This is an effect due to the hardening of the adhesive vapors. These residues can be removed, for example with isopropanol or acetone. However, it is important to note that the surfaces to be cleaned are resistant to these solvents. The blooming effect can be prevented / reduced by using the adhesive in moderation and by ensuring sufficient air humidity and ventilation in the work area.

NSF registered, P1 class, reg. n. 151993

NSF tested according to NSF / ANSI 61 for use in sanitary water and drinking water

The instructions for use are recommendations based on the tests carried out and our experience; perform appropriate tests before each application. Due to the wide variety of applications, storage conditions and since it is not possible to control the application, use or processing of the products, we decline any responsibility in this regard. We decline all responsibility for any technical information or consultancy service provided free of charge by our customer service. Therefore, before using the product, anyone who intends to use it is required to establish whether or not it is suitable for the intended use and in any case, assumes all responsibility that may arise from its use. We guarantee a constant quality of our products. Würth products are constantly being improved. We therefore reserve the right to make technical changes and to further modify the products at any time without notice.

Rely on Elettrox to choose reliable and high quality products