8 ohm 200W high frequency ND1018BT driver
    EX

    8 ohm 200W high frequency ND1018BT driver

    Reference: ND1018BT
    ā‚¬180.00
    Tax included Shipped in about 5/7 days

    8 ohm 200W high frequency ND1018BT driver

    Quantity
      Available in a few days

     

    Quick shipment in all Italy territory

     

    Safe payments with cards

    Driver 8 ohm 200W high frequency ND1018BT

    The ND1018BT 1-inch output high-frequency compression driver is designed for high-quality two-way system applications. Featuring proprietary Phase Plug architecture, the ND1018BT compression driver delivers high-level production consistency and a smooth, consistent wavefront at the horn input across the full working frequency range. The phase plug design with short apertures and a high flare rate ensures low distortion and noticeable improvements in the reproduction of mid-high frequencies. With its ellipsoidal suspension shape, the ND1018BT titanium diaphragm assembly exhibits a constant slope response from 1kHz to 18kHz with smooth sliding behavior. An edge-wound aluminum voice coil, wound on proprietary Nomex, completes the diaphragm assembly. Due to its physical properties, the proprietary treated Nomex moulder exhibits a 30% higher tensile elongation value at working operating temperature (200 Ā° C) than Kapton. In addition, this former patented material is suitable for working even in environments with higher moisture content. Through careful use of elementary pieces of neodymium magnets, Eighteen sound engineers have developed a powerful neodymium magnet capable of reaching 18 KGauss in space in a compact and lightweight structure. A copper ring on the pole piece reduces inductance above 10 kHz by improving phase and impedance linearization. The custom designed O-ring creates an airtight seal between the plate and the cover ensuring the load of the bladder. For the increase in the use of high-powered audio systems in outdoor events or marine environments, the ability to function properly in adverse weather conditions is a key point of the Eighteen Sound philosophy. Furthermore, the special treatment applied to the magnet and to the upper and rear plates of the magnetic structure makes the driver more resistant to the corrosive effects of salts and oxidation.

    Details:

    Hole diameter: 25mm
    Coil diameter: 44mm
    Rated power: 50W
    Peak power: 100W
    Frequency range: 1.6 - 20 kHz
    Winding material : aluminum
    Impedance: 8 ohm
    Minimum impedance: 7 ohm
    Sensitivity: 108.0dB
    Recommended crossover: 1.6 kHz
    Diaphragm material: titanium
    Magnet material : neodymium

    Availability to be checked at the supplier's warehouse

    Product Details

    EX

    Specific References

    EAN13
    5050000001274